Displaying 1 - 50 of 221
No Staff Name Article Detail ISI Impact Factor
1 Anika Zafiah bt Mohd Rus
(First author)
A.Z.M.Rus. Shahruddin Kormin
(2018,Published) SOLVOLYSIS LIQUEFACTION AND CHARACTERIZATION OF BIOPOLYOL PREPARED FROM LIQUEFIED OIL PALM FRUIT WASTE, Journal of Fundamental and Applied Sciences, Vol: 10, 2S, 701-721, ISSN:11129867.
http://dx.org/10.4314/jfas.v10i2s.52
1.36
2 Anika Zafiah bt Mohd Rus
(First author)
S. Kormin, A.Z.M. Rus
(2018,Published) FABRICATION AND CHARACTERIZATION OF POLYURETHANE FOAM PREPARED FROM LIQUEFIED OIL PALM MESOCARP FIBRE WITH RENEWABLE MONOMER MADE FROM WASTE COOKING OIL, Journal of Fundamental and Applied Sciences, Vol: 10i, 2S, 722-744, ISSN:11129867.
http://dx.doi.org/10.4314/jfas.v10i2s.53
1.36
3 Hamimah bt Abd.Rahman
(Co-author)
N. K. HOA, H. A. RAHMAN, M. R. SOMALU
(2018,Published) EFFECTS OF NiO LOADING AND PRE-CALCINATION TEMPERATURE ON NiO-SDCC COMPOSITE ANODE POWDER FOR LOW-TEMPERATURE SOLID OXIDE FUEL CELLS, Ceramic Silikaty, Vol: 62, 1, 50-58, ISSN:0862-5468 (Print), 1804-5847 (online).
https://www.irsm.cas.cz/materialy/cs_content/2017_doi/Hoa_CS_2017_0044.pdf
0.439
4 Mohd Azhar Bin Harimon
(First author)
Mohd Azhar Harimon, Yukio Miyashita, Yuichi Otsuka, Yoshiharu Mutoh, Shinichi Yamamoto
(2018,Published) High temperature fatigue characteristics of P/M and hot-forged W-Re and TZM for X-ray target of CT scanner, Materials and Design, Vol: 137, 1, 335-344, ISSN:0264-1275.
https://doi.org/10.1016/j.matdes.2017.10.044
4.364
5 Musli Nizam Bin Yahya
(Co-author)
Desmond Daniel Vui Sheng Chin, Musli Nizam Bin Yahya, Nazli Bin Che Din, Pauline Ong
(2018,Published) Acoustic properties of biodegradable composite micro-perforated panel (BC-MPP) made from kenaf fibre and polylactic acid (PLA), Applied Acoustics, Vol: 138, , 179–187, ISSN:0003-682X.
https://www.sciencedirect.com/science/article/pii/S0003682X17311891#
1.921
6 Norfazillah bt. Talib
(First author)
N. Talib, E. A. Rahim
(2018,Published) Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining, Tribology International, Vol: 118, , 89-104, ISSN:0301679X.
http://www.sciencedirect.com/science/article/pii/S0301679X17304310
2.903
7 Norfazillah bt. Talib
(First author)
N. Talib, E. A. Rahim
(2018,Published) Experimental evaluation of physicochemical properties and tapping torque of hexagonal boron nitride in modified jatropha oils-based as sustainable metalworking fluids, Journal of Cleaner Production, Vol: 171, , 743-755, ISSN:9596526.
http://www.sciencedirect.com/science/article/pii/S0959652617323545
5.715
8 Syariful Syafiq bin Shamsudin
(Co-author)
Djamal Hissein Didane, Nurhayati Rosly, Mohd Fadhli Zulkafli, Syariful Syafiq Shamsudin
(2018,Published) Performance evaluation of a novel vertical axis wind turbine with coaxial contra-rotating concept, Renewable Energy, Vol: 115, , 353-361, ISSN:09601481.
https://doi.org/10.1016/j.renene.2017.08.070
4.357
9 Azian binti Hariri
(First author)
Hariri A., Mohamad Noor N., Paiman N.A., Ahmad Zaidi A.M., Zainal Bakri S.F.
(2017,Published) Heavy metals found in the breathing zone, toenails and lung function of welders working in an air-conditioned welding workplace, International Journal of Occupational Safety and Ergonomics, Vol: online first, , 1-7, ISSN:10803548.
http://www.tandfonline.com/doi/abs/10.1080/10803548.2017.1368950?journalCode=tose20
0.469
10 Erween Bin Abd Rahim
(Co-author)
N. Talib , R.M. Nasir , E.A. Rahim
(2017,Published) Tribological Behaviour Of Modified Jatropha Oil By Mixing Hexagonal Boron Nitride Nanoparticles As A Bio-Based Lubricant For Machining Processes, Journal Of Cleaner Production, Vol: 147, 1, 360-378, ISSN:0959-6526.
https://doi.org/10.1016/j.jclepro.2017.01.086
5.715
11 Erween Bin Abd Rahim
(Co-author)
N. Talib, H. Sasahara, E. A. Rahim
(2017,Published) Evaluation Of Modified Jatropha-Based Oil With Hexagonal Boron Nitride Particle As A Biolubricant In Orthogonal Cutting Process, International Journal Of Advanced Manufacturing And Technology, Vol: 92, 1-4, 371-391, ISSN:0268-3768.
https://link.springer.com/article/10.1007/s00170-017-0148-x
2.209
12 Erween Bin Abd Rahim
(Co-author)
T. Mulyana, E. A. Rahim, S. N. M. Yahaya
(2017,Published) The influence of cryogenic supercritical carbon dioxide cooling on tool wear during machining high thermal conductivity steel, Journal of Cleaner Production, Vol: 164, , 950-962, ISSN:0959-6526.
https://doi.org/10.1016/j.jclepro.2017.07.019
5.715
13 Haslina bt Abdullah
(First author)
Abdullah, H., ; Ramli, R., Wahab, D.A
(2017,Published) Tool path length optimisation of contour parallel milling based on modified ant colony optimisation
, International Journal of Advanced Manufacturing Technology, Vol: 92, 1, 1263, ISSN:1276.
https://link.springer.com/article/10.1007/s00170-017-0193-5
2.209
14 Ishkrizat bin Taib
(Co-author)
A.Z. Khudzari, , S.A. Thomas, S. Empaling, N. Darlis, K. Osman, J. Dillon, I. Taib
(2017,Published)
International Journal of Cardiology
Volume 249, Supplement, 15 December 2017, Pages S9

Cover image
Computational Fluid Dynamic Study of a Spiral Flow Inducing Cannula Versus Standard Cannula, International Journal of Cardiology, Vol: 249, 1, 1-504, ISSN:0167-5273.
https://www.sciencedirect.com/science/article/pii/S0167527317356796
6.189
15 Lee Woon Kiow
(First author)
WK Lee, MM Ratnam, ZA Ahmad
(2017,Published) Detection of chipping in ceramic cutting inserts from workpiece profile during turning using fast Fourier transform (FFT) and continuous wavelet transform (CWT), Precision Engineering, Vol: 47, , 406-423, ISSN:0141-6359.
http://www.sciencedirect.com/science/article/pii/S0141635916302379
2.237
16 Mohd Azhar Bin Harimon
(First author)
Mohd Azhar Harimon, Nafisah Arina Hidayati, Yukio Miyashita, Yuichi Otsuka, Yoshiharu Mutoh, Shinichi Yamamoto, Hitoshi Aoyama
(2017,Published) High temperature fracture toughness of TZM alloys with different kinds of grain boundary particles, International Journal of Refractory Metals and Hard Materials, Vol: 66, 1, 52-56, ISSN:0263-4368.
http://dx.doi.org/10.1016/j.ijrmhm.2017.02.006
2.155
17 Mohd Fadhli bin Zulkafli
(Co-author)
Djamal Hissein Didane, Nurhayati Rosly, Mohd Fadhli Zulkafli, Syariful Syafiq Shamsudin
(2017,Published) Performance Evaluation Of A Novel Vertical Axis Wind Turbine With Coaxial Contra-Rotating Concept, RENEWABLE ENERGY, Vol: 115, , 353-361, ISSN:09601481.
https://www.sciencedirect.com/science/article/pii/S0960148117308315
4.357
18 Mohd Nasrull bin Abdol Rahman
(First author)
Mohd Nasrull Abdol Rahman and Siti Shafika Mohamad
(2017,Published) Review on pen-and-paper-based observational methods for assessing ergonomic risk factors of computer work, WORK: A Journal of Prevention, Assessment & Rehabilitation, Vol: 57, 1, 69-77, ISSN:1051-9815.
http://content.iospress.com/articles/work/wor2541
0.715
19 Ng Chuan Huat
(Co-author)
Pauline Ong, Choon Sin Ho, Desmond Daniel Vui Sheng Chin, Chee Kiong Sia, Chuan Huat Ng , Md Saidin Wahab, Abduladim Salem Bala
(2017,Published) Diameter Prediction And Optimization Of Hot Extrusion-Synthesized Polypropylene Filament Using Statistical And Soft Computing Techniques,Journal Of Intelligent Manufacturing, journal of intelligent manufacturing, Vol: october 2017, , 1-8, ISSN:1572-8145.
https://link.springer.com/content/pdf/10.1007/s10845-017-1365-8.pdf
3.04
20 Noor Hakim bin Rafai
(Co-author)
N. Hafizah Azis , M. Zulafif Rahim, Nasuha Sa¿ude, N. Rafai, M.S. Yusof, ALM Tobi, ZM Sharif, M. Rasidi Ibrahim, A.E Ismail
(2017,Published) THE INFLUENCE OF INJECTION MOLDING PARAMETER ON PROPERTIES OF THERMALLY CONDUCTIVE PLASTIC, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING JOURNAL, Vol: 203, 1, 1-9, ISSN:1757899X.
http://iopscience.iop.org/article/10.1088/1757-899X/203/1/012018/pdf
0.16
21 Norfazillah bt. Talib
(First author)
N. Talib, R. M. Nasir, E. A. Rahim
(2017,Published) Tribological behaviour of modified jatropha oil by mixing hexagonal boron nitride nanoparticles as a bio-based lubricant for machining processes, Journal of Cleaner Production, Vol: 147, , 360-378, ISSN:9596526.
http://www.sciencedirect.com/science/article/pii/S0959652617301002
5.715
22 Norfazillah bt. Talib
(First author)
N. Talib, H. Sasahara, E. A. Rahim
(2017,Published) Evaluation of modified jatropha-based oil with hexagonal boron nitride particle as a biolubricant in orthogonal cutting process, International Journal of Advanced Manufacturing Technology, Vol: 92, , 371-391, ISSN:2683768.
https://link.springer.com/article/10.1007/s00170-017-0148-x
2.209
23 Nur Kamilah Binti Yusuf
(Co-author)
Ahmad A., Lajis M.A., Yusuf N.K.
(2017,Published) On the role of processing parameters in Producing recycled aluminum AA6061 based metal matrix composite (MMC-AlR) prepared using hot press forging (HPF) process , Materials, Vol: 10 , 9, 1098, ISSN:19961944.
https://www.scopus.com/inward/record.uri?eid=2-s2.0-85029772965&doi=10.3390%2fma10091098&partnerID=40&md5=80c082e61348fad12281e4
2.654
24 Nur Kamilah Binti Yusuf
(First author)
Yusuf N.K., Lajis M.A., Ahmad A.
(2017,Published) Hot press as a sustainable direct recycling technique of aluminium: Mechanical properties and surface integrity 2017 1 10.3390/ma10080902 Article Scopus 2-s2.0-85026736026

, Materials, Vol: 10 , 8, 902, ISSN:19961944.
https://www.scopus.com/inward/record.uri?eid=2-s2.0-85026736026&doi=10.3390%2fma10080902&partnerID=40&md5=d0f5571ceea1232a31c662
2.654
25 Nur Kamilah Binti Yusuf
(Co-author)
Lajis M.A., Ahmad A., Yusuf N.K., Azami A.H., Wagiman A.
(2017,Published) Mechanical properties of recycled aluminium chip reinforced with alumina (Al2O3) particle: Mechanische Eigenschaften von mit Aluminiumoxid (Al2O3) verstärkten recycelten , Materialwissenschaft und Werkstofftechnik, Vol: 306, 30, 1, ISSN:1521-4052.
https://www.scopus.com/inward/record.uri?eid=2-s2.0-85018694751&doi=10.1002%2fmawe.201600778&partnerID=40&md5=4fa09e542a5e11a105
0.3
26 Nurhayati bt. Rosly
(Co-author)
Djamal Hissein Didane, Nurhayati Rosly, Mohd Fadhli Zulkafli, Syariful Syafiq Shamsudin
(2017,Published) Performance Evaluation Of A Novel Vertical Axis Wind Turbine With Coaxial Contra-Rotating Concept, Renewable Energy, Vol: 115, , 353-361, ISSN:09601481 .
https://www.sciencedirect.com/science/article/pii/S0960148117308315
4.357
27 Ong Pauline
(First author)
Pauline Ong, Choon Sin Ho, Desmond Daniel Vui Sheng Chin, Chee Kiong Sia, Chuan Huat Ng , Md Saidin Wahab, Abduladim Salem Bala
(2017,Published) Diameter prediction and optimization of hot extrusion-synthesized polypropylene filament using statistical and soft computing techniques, Journal of Intelligent Manufacturing, Vol: -, , 1-16, ISSN:1572-8145.
https://link.springer.com/article/10.1007%2Fs10845-017-1365-8
3.035
28 Ong Pauline
(First author)
Ong Pauline, Zarita Zainuddin, Lai Kee Huong
(2017,Published) A novel selection of optimal statistical features in the DWPT domain for discrimination of ictal and seizure-free electroencephalography signals, Pattern Analysis and Applications, Vol: -, , 1-13, ISSN:14337541.
https://link.springer.com/article/10.1007%2Fs10044-017-0642-7
1.352
29 Ong Pauline
(Co-author)
Zarita Zainuddin, Pauline Ong
(2017,Published) Optimization of wavelet neural networks with the firefly algorithm for approximation problems, Neural Computing and Applications, Vol: 28, 7, 1715-1728, ISSN:1433-3058.
https://link.springer.com/article/10.1007%2Fs00521-015-2140-4
1.569
30 Ramhuzaini Bin Abd Rahman
(First author)
Ramhuzaini Abd. Rahman and Nariman Sepehri
(2017,Published) Design and experimental evaluation of a dynamical adaptive backstepping-sliding mode control scheme for positioning of an antagonistically paired pneumatic artificial muscles driven actuating system, International journal of control, Vol: 90, 2, 256-290, ISSN:1366-5820 (online).
http://www.tandfonline.com/action/journalInformation?show=abstractingIndexing&journalCode=tcon20#.VwSZGI9OLIV
2.208
31 Ramhuzaini Bin Abd Rahman
(First author)
Ramhuzaini Abd. Rahman and Nariman Sepehri
(2017,Published) Experimental comparison between proportional and PWM-solenoid valves controlled servo-pneumatic positioning systems using a dynamical adaptive backstepping-sliding mode control, Transactions for Canadian Society for Mechanical Engineering, Vol: 41, 1, 65-83, ISSN:0315-8977.
http://www.tcsme.org/
0.333
32 Ramhuzaini Bin Abd Rahman
(Co-author)
Khurram Butt, Ramhuzaini A. Rahman, Nariman Sepehri, Shaahin Filizadeh
(2017,Published) Globalized and bounded Nelder-Mead algorithm with deterministic restarts for tuning controller parameters: Method and application, Optimal control: applications and methods, Vol: -, -, -, ISSN:1099-1514.
https://doi.org/10.1002/oca.2311
1.558
33 Reazul Haq bin Abdul Haq
(Co-author)
Ahmad, A., Yunos, M.Z., Harun, Z., Hassan, M.F., Adzila, S., Arifin, A.M.T., Rahman, M.N.A., Haq, R.H.A., Baharulrazi, N.
(2017,Published) Effect of polyaniline on surface properties of polysulfone membrane, Chemical Engineering Transactions, Vol: 56, , 961-969, ISSN:22839216.
https://www.scopus.com/record/display.uri?eid=2-s2.0-85019468713&origin=resultslist&sort=plf-f&src=s&sid=38117b3aad59fdce8e81919
0.35
34 Reazul Haq bin Abdul Haq
(Co-author)
Ahmad, A., Yunos, M.Z., Harun, Z., Hassan, M.F., Adzila, S., Arifin, A.M.T., Rahman, M.N.A., Haq, R.H.A., Baharulrazi, N.
(2017,Published) Performance of polysulfone/PANI membrane for humic acid separation, Chemical Engineering Transactions, Vol: 56, , 703-708, ISSN:22839216.
https://www.scopus.com/record/display.uri?eid=2-s2.0-85019489431&origin=resultslist&sort=plf-f&src=s&sid=38117b3aad59fdce8e81919
0.35
35 Rosli bin Ahmad
(Co-author)
Sheggaf, Z.M., Ahmad, R., Asmael, M.B.A., Elaswad, A.M.M.
(2017,Published)
Document title Authors Year Source Cited by
Solidification, microstructure, and mechanical properties of the as-cast ZRE1 magnesium alloy with different praseodymium contents, International journal of Minerals, Metallurgy and Materials, Vol: 24, 11, 1306-1320, ISSN:1674-4799.
https://link.springer.com/article/10.1007%2Fs12613-017-1523-1
0.943
36 Rosli bin Ahmad
(First author)
Ahmad, R., Asmael, M.B.A., Shahizan, N.R., Gandouz, S.
(2017,Published) Reduction in secondary dendrite arm spacing in cast eutectic Al–Si piston alloys by cerium addition, International Journal of Minerals, Metallurgy and Materials, Vol: 24, 1, 91-101, ISSN:1674-4799.
https://link.springer.com/article/10.1007%2Fs12613-017-1382-9
0.943
37 Saliza Azlina bt Osman
(Co-author)
Rabiatul adawiyah Binti Mohamed Anuar, Saliza Azlina Osman
(2017,Published) Interfacial reaction between SAC305 lead–free solders and ENImAg surface finish and bare copper, Materialwissenschaft und Werkstofftechnik, Vol: 48, 3-4, 235-240, ISSN:xxxxxx.
http://onlinelibrary.wiley.com/doi/10.1002/mawe.201600764/epdf?r3_referer=wol&tracking_action=preview_click&show_checkout=1&purc
0.425
38 Al Emran bin Ismail
(Co-author)
A. Hamdan, F. Mustapha, K. A. Ahmad, A. S. Mohd Rafie, M. R. Ishak and A. E. Ismail
(2016,Published) The Effect of Customized Woven and Stacked Layer Orientation on Tensile and Flexural Properties of Woven Kenaf Fibre Reinforced Epoxy Composites, International Journal of Polymer Science, Vol: 6514041, , 11, ISSN:1687-9422.
http://dx.doi.org/10.1155/2016/6514041
1.195
39 Al Emran bin Ismail
(Co-author)
Hamdan, A.; Mustapha, F.; Ahmad, K. A.; Rafie, A. S. Mohd; Ishak, M. R.; Ismail, A. E.
(2016,Published) The bonded macro fiber composite (MFC) and woven kenaf effect analyses on the micro energy harvester performance of kenaf plate using modal testing and Taguchi method., Journal of Vibroengineering, Vol: 18, 2, 699-716, ISSN:1392-8716.
http://www.jve.lt/Vibro/JVE-2016-18-2/JVE0181603.html
0.617
40 Azriszul bin Mohd Amin
(First author)
Mohd Halim Irwan Ibrahim , Azriszul Mohd Amin , Rosli Asmawi and Najwa Mustafa
(2016,Published) Influences of Restaurant Waste Fats and Oils (RWFO) from Grease Trap as Binder on Rheological and Solvent Extraction Behavior in SS316L Metal Injection Molding, Metals Journal, Vol: 6, 2, 1-14, ISSN:20754701.
https://www.scopus.com/record/display.uri?eid=2-s2.0-84958064022&origin=resultslist&sort=plf-f&src=s&st1=MDPI&nlo=&nlr=&nls=&sid
0.883
41 Hamimah bt Abd.Rahman
(Co-author)
NURUL AKIDAH BAHARUDDIN, ANDANASTUTI MUCHTAR, MAHENDRA RAO SOMALU, MUHAMMED ALI S.A., HAMIMAH ABD. RAHMAN
(2016,Published) INFLUENCE OF SINTERING TEMPERATURE ON THE POLARIZATION RESISTANCE OF La0.6Sr0.4Co0.2Fe0.8O3-δ– SDC CARBONATE COMPOSITE CATHODE, Ceramics-Silikáty, Vol: 60, 2, 115-121, ISSN:0862-5468 .
http://www.ceramics-silikaty.cz/index.php?page=cs_content_doi&id_cislo=18
0.435
42 Hasan Zuhudi bin Abdullah
(Co-author)
T.C. Lee, P. Koshy, H.Z. Abdullah and M.I. Idris
(2016,Published) Precipitation of bone-like apatite on anodised titanium in simulated body fluid under UV irradiation, Surface and Coating Technology, Vol: 301, -, 20-28, ISSN:0257-8972.
http://dx.doi.org/10.1016/j.surfcoat.2015.11.010
1.998
43 Lee Woon Kiow
(First author)
WK Lee, MM Ratnam, ZA Ahmad
(2016,Published) Detection Of Fracture In Ceramic Cutting Tools From Workpiece Profile Signature Using Image Processing And Fast Fourier Transform, Precision Engineering, Vol: 44, , 131-142, ISSN: 0141-6359.
http://www.sciencedirect.com/science/article/pii/S0141635915002147
2.237
44 Lee Woon Kiow
(First author)
W.K. Lee, M.M. Ratnam, Z.A. Ahmad
(2016,Published) In-Process Detection Of Chipping In Ceramic Cutting Tools During Turning Of Difficult-To-Cut Material Using Vision-Based Approach, The International Journal of Advanced Manufacturing Technology, Vol: 85, 5-8, 1275-1290, ISSN:0268-3768.
https://link.springer.com/article/10.1007/s00170-015-8038-6
2.209
45 Maizlinda Izwana bt Idris
(Co-author)
T.C. Lee, P. Koshy, H.Z. Abdullah and M.I. Idris
(2016,Published) Precipitation of bone-like apatite on anodised titanium in simulated body fluid under UV irradiation, Surface and Coating Technology, Vol: 301, -, 20-28, ISSN:0257-8972.
http://dx.doi.org/10.1016/j.surfcoat.2015.11.010
1.998
46 Mohammad Zulafif bin Rahim
(First author)
M. Zulafif Rahim, Songlin Ding, John Mo
(2016,Published) Electrical discharge grinding of polycrystalline diamond – Effect of wheel rotation, Machining Science and Technology: An International Journal, Vol: 20, 1, 62-78, ISSN:10910344.
http://www.tandfonline.com/doi/pdf/10.1080/10910344.2015.1085315?redirect=1
0.703
47 Mohd Halim Irwan Bin Ibrahim
(First author)
Irwan Ibrahim, M.H., Amin, A.M., Asmawi, R., Mustafa, N.
(2016,Published) Document Influences of restaurant waste fats and oils (RWFO) from grease trap as binder on rheological and solvent extraction behavior in SS316L metal injection molding, Metals, Vol: 6, 2, 14, ISSN:2075-4701.
http://www.mdpi.com/2075-4701/6/2/19
1.574
48 Mohd Halim Irwan Bin Ibrahim
(Co-author)
Ibrahim M.H.I., Mustafa N., Amin A.M., Asmawi R.
(2016,Published) Optimization of Natural hydroxyapatite/SS316L feedstock for highest green density in metal injection molding by using Taguchi method, International Journal of Mechanical and Mechatronics Engineering, Vol: 16, 4, 76--82, ISSN:22272771.
https://www.scopus.com/inward/record.uri?eid=2-s2.0-84988446321&partnerID=40&md5=c8e0b9653177c3786b789bbd74c7ad30
1.807
49 Nik Hisyamudin bin Muhd Nor
(Co-author)
Mohamad F., Sugiyama S., Zain Z.M., Nor N.H.M., Sasano J., Shinagawa T., Watase S., Izaki M.
(2016,Published) Effect of light intensity on the light-assisted electrochemical construction of (0001)-ZnO/(111)-Cu2O heterostructure, Journal of Nanoscience and Nanotechnology, Vol: 16, 12, 12798--12804, ISSN:15334880.
http://www.ingentaconnect.com/content/asp/jnn/2016/00000016/00000012/art00106
1.338
50 Nor Azali Bin Azmir
(First author)
Nor Azali Azmir, Mohd Imran Ghazali, Musli Nizam Yahya & Mohamad Hanafi Ali
(2016,Published) Hand-arm vibration disorder among grass-cutter workers in Malaysia, International Journal of Occupational Safety and Ergonomics, Vol: 22, 4, 1-6, ISSN:10803548.
http://www.ncbi.nlm.nih.gov/pubmed/27050159
0.53

Pages