 |
Dr Mohd Faizal bin Mohideen Batcha( PhD, UTP, Malaysia)Email: mfaizal@uthm.edu.my Department: Energy and Thermofluid Engineering Research Group: Energy Technologies Research Group (EnRG) 
|
Member (No.44525R), BEM.
Companion Member (No.C27998), Institution of Engineers, Malaysia (IEM).
Registered Electrical Energy Manager (REEM) (No.PTE-0055-2015), Suruhanjaya Tenaga (ST).
Certified Professional in Measurement & Verification (No.MGTC/CPMV/16/034), Malaysian Green Technology Corp. (GreenTech Malaysia).
Journal Articles
Displaying 22 records.| Publication Year | Articles |
|---|---|
| 2009 | 1 |
| 2011 | 2 |
| 2012 | 6 |
| 2013 | 2 |
| 2014 | 5 |
| 2015 | 1 |
| 2016 | 4 |
| 2017 | 1 |
| 22 |
| No | Journal Detail | Index | IF |
|---|---|---|---|
| 1 |
K. Kamarudin, M.S. Wahab, M. Ibrahim, M.F.M. Batcha, A.A. Raus, Aqeel Ahmed, N. Sa¿ude, Z. Shayfull, and S.M. Nasir (2017) The Effect Of Square Finned Conformal Cooling (Sfcc) On Cycle Time For Plastic Injection Moulding, Journal of Mechanical Engineering, Vol: 4, 1, 79-82, ISSN:K. Kamarudin, M.S. Wahab, M. Ibrahim, M.F.M. Batcha, A.A. Raus, Aqeel Ahmed, N. Sa¿ude, Z. Shayfull, and S.M. Nasir. (Published) |
Google Scholar |
|
| 2 |
Sulastri Sabudin, Wan Saiful-Islam Wan Salim and Mohd Faizal Mohideen Batcha (2016) COLD FLOW BEHAVIOUR OF A SWIRLING FLUIDIZED BED INCINERATOR, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 18, 11129-11134, ISSN:1819-6608. (Published) |
SCOPUS |
|
| 3 |
Jamal Hazri Zakaria, Mohd. Faizal Mohideen Batcha and Norzelawati Asmuin (2016) THIN LAYER MODELS FOR SPONGE MEDIA DRYING, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 18, 11209-11214, ISSN:1819-6608 . (Published) |
SCOPUS |
|
| 4 |
Jamal Hazri Zakaria, Mohd Faizal Mohideen Batcha, Norzelawati Asmuin (2016) Thin layer models for sponge media drying, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 18, 11209-11214, ISSN:1819-6608. (Published) |
SCOPUS |
|
| 5 |
Sulastri Sabudin, Wan Saiful-Islam Wan Salim and Mohd. Faizal Mohideen Batcha (2016) Cold flow behavior of a swirling fluidized bed incinerator, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 18, 11129-11134, ISSN:1819-6608. (Published) |
SCOPUS |
|
| 6 |
Zakaria J.H., Zaid M.H.H.M., Batcha M.F.M., Asmuin N. (2015) Feasibility study on pliant media drying using fluidized bed dryer, IOP Conference Series: Materials Science and Engineering, Vol: 88, 1 012071, 1-7, ISSN:1757-8981. (Published) |
SCOPUS |
|
| 7 |
Seri S.M., Abdul Karim Z.A., Batcha M.F.M., Raghavan V.R. (2014) Tube bank with integral wake splitter performance at Reynolds number 5000 to 50000, Applied Mechanics and Materials, Vol: 465-466, , 546-551, ISSN:1660-9336. (Published) |
SCOPUS |
|
| 8 |
Farhan M.N., Mohideen Batcha M.F., Sabudin S. (2014) Drying characteristics of several agricultural product: Effect of drying temperature, Applied Mechanics and Materials, Vol: 465-466, , 472-479, ISSN:16609336. (Published) |
SCOPUS |
|
| 9 |
Zainal Abidin M.H., Sabudin S., Zakaria J.H., Mohideen Batcha M.F. (2014) Thin layer modeling of grated coconut drying, Applied Mechanics and Materials, Vol: 660, , 367-372, ISSN:1660-9336. (Published) |
SCOPUS |
|
| 10 |
Zakaria J.H., Md Zaid M.H.H., Mohideen Batcha M.F., Asmuin N. (2014) Drying of sponge media using swirling fluidized bed dryer, Applied Mechanics and Materials, Vol: 660, , 644-648, ISSN:1660-9336. (Published) |
SCOPUS |
|
| 11 |
Suzairin Md Seri, Zainal Ambri Abdul Karim, Hamidon Salleh, Mohd Faizal Mohideen Batcha, Vijay R. Raghavan (2014) Hydrodynamic characteristics of flow around tube bank with integral wake splitter, Applied Mechanics and Materials, Vol: 660, , 649-653, ISSN:1660-9336. (Published) |
SCOPUS |
|
| 12 |
Hafiz M.A., Batcha M.F.M., Asmuin N. (2013) Effect of plenum chamber depth in a swirling fluidized bed, IOP Conference Series: Materials Science and Engineering, Vol: 50, , 1-7, ISSN:1757-8981. (Published) |
SCOPUS |
|
| 13 |
Batcha M.F.M., Nawi M.A.M., Sulaiman S.A., Raghavan V.R. (2013) Numerical investigation of airflow in a swirling fluidized bed, Asian Journal of Scientific Research, Vol: 6, 2, 157-166, ISSN:1992-1454. (Published) |
SCOPUS |
|
| 14 |
Harun Z., Nawi N.M., Batcha M.F., Gethin D. (2012) Modeling of layering ceramic shell mould, Applied Mechanics and Materials, Vol: 232, , 548-552, ISSN:1660-9336. (Published) |
SCOPUS |
|
| 15 |
Mohideen M.F., Sreenivasan B., Sulaiman S.A., Raghavan V.R. (2012) Heat transfer in a swirling fluidized bed with geldart type-D particles, Korean Journal of Chemical Engineering, Vol: 29, 7, 862-867, ISSN:0256-1115. (Published) |
ISI with Impact Factor |
1.059 2012 |
| 16 |
Faizal M., Seri S.M., Ezamuddin Sh., Raghavan V.R. (2012) Numerical investigation of air flow distribution in a swirling fluidized bed, Advanced Materials Research, Vol: 499, , 132-137, ISSN:1022-6680. (Published) |
SCOPUS |
|
| 17 |
Faizal M., Seri S.M., Al-Hafiz M., Raghavan V.R. (2012) CFD studies on velocity distribution of air in a swirling fluidized bed, Advanced Materials Research, Vol: 468-471, , 25-29, ISSN:1022-6680. (Published) |
SCOPUS |
|
| 18 |
Batcha M.F.M., Sulaiman S.A., Raghavan V.R. (2012) Hydrodynamics of oil palm frond in a swirling fluidized bed dryer, Applied Mechanics and Materials, Vol: 117-119, , 1829-1833, ISSN:1660-9336. (Published) |
SCOPUS |
|
| 19 |
Mohideen M.F., Md Seri S., Raghavan V.R. (2012) Fluidization of Geldart Type-D particles in a swirling fluidized bed, Applied Mechanics and Materials, Vol: 110-116, , 3720-3727, ISSN:1660-9336. (Published) |
SCOPUS |
|
| 20 |
Mohideen M.F., Faiz M., Salleh H., Zakaria H., Raghavan V.R. (2011) Drying of oil palm frond via swirling fluidization technique, Proceedings of the World Congress on Engineering 2011, WCE 2011, Vol: 3, , 2375-2380, ISSN:87249. (Published) |
SCOPUS |
|
| 21 |
Batcha M.F.M., Raghavan V.R. (2011) Experimental studies on a swirling fluidized bed with annular distributor, Journal of Applied Sciences, Vol: 11, 11, 1980-1986, ISSN:1812-5654. (Published) |
SCOPUS |
|
| 22 |
Ghafir M.F.A., Batcha M.F.M., Raghavan V.R. (2009) Prediction of the thermal conductivity of metal hydrides - The inverse problem, International Journal of Hydrogen Energy, Vol: 34, 16, 7125-7130, ISSN:0360-3199. (Published) |
ISI with Impact Factor |
3.945 2009 |
Books
Displaying 1 records.| No | Book Detail | Involvement |
|---|---|---|
| 1 |
Aerodynamics of Swirling Fluidized Bed with Annular Distributor
(2016), ISBN:978-3-659-69415-8, LAP Lambert Academic Publishing. |
Co-author |
Chapter in Book
No chapter in book records found.
Article in Proceedings
Displaying 7 records.| No | Article in Proceedings | Involvement |
|---|---|---|
| 1 |
Characterization Of Bottom And Fly Ashes Generated Co-Incineration Of Biomass With Automotive Shredder Residue In Proc.
ICME2017 (2017), pp.1-9, ISBN:2261236X. https://www.matec-conferences.org/articles/matecconf/abs/2017/49/matecconf_icme2017_00009/matecconf_icme2017_00009.html |
Co-author |
| 2 |
Cycle Time Improvement For Plastic Injection Moulding Process By Sub Groove Modification In Conformal Cooling Channel In Proc.
AIP Conference Proceeeding (2017), pp.1-8, ISBN:9780735415652. http://dx.doi.org/10.1063/1.5002370 |
Co-author |
| 3 |
Emission Studies From Combustion Of Empty Fruit Bunch Pellets In A Fluidized Bed Combustor In Proc.
IRIS2017 (2017), pp.1-10, ISBN:17578981. http://iopscience.iop.org/article/10.1088/1757-899X/226/1/012003/meta |
Co-author |
| 4 |
Hydrodynamics study on drying of pepper in swirling fluidized bed dryer (SFBD)l In Proc.
IRIS2017 (2017), pp.1-7, ISBN:17578981. http://iopscience.iop.org/article/10.1088/1757-899X/226/1/012053/meta |
Co-author |
| 5 |
Improvement Of Solid-Gas Interaction In Fluidized Bed Systems Via Secondary Air Injection In Proc.
ICME2017 (2017), pp.1-7, ISBN:2261236X. https://www.matec-conferences.org/articles/matecconf/abs/2017/49/matecconf_icme2017_00014/matecconf_icme2017_00014.html |
First author |
| 6 |
Cycle Time Improvement For Plastic Injection Moulding Process By Sub Groove Modification In Conformal Cooling Channel In Proc.
AIP Conference Proceeding (2017), pp.020176-1-020176-7, ISBN:0094243X. http://dx.doi.org/10.1063/1.5002370 |
Co-author |
| 7 |
Flow Characteristics Of 3-D Turning Diffuser Using Particle Image Velocimetry In Proc.
AIP Conference Proceeding (2017), pp.1-9, ISBN:978-0-7354-149. http://dx.doi.org/10.1063/1.4981162 |
Co-author |
Other Publications
No other publications found.
Research
Displaying 20 records.| Involvement | Involved as |
|---|---|
| Research member | 10 |
| Project leader | 10 |
| No | Project Title | Start | End | Involvement | Category | Funding |
|---|---|---|---|---|---|---|
| 1 |
[FRGS 1589] Energy Characteristics of a Vehicle Power Unit with Integrated Heat and Kinetic Energy Recovery System |
1/8/2016 | 31/7/2019 | Research member | National | |
| 2 |
[GIPS U 999] Drying kinetics of pepper in swirling fluidized bed dryer |
1/3/2008 | 31/8/2018 | Project leader | University | 6,000 |
| 3 |
[PPRN A146] Batik Processing Machine |
1/12/2017 | 1/6/2018 | Research member | Private | |
| 4 |
[Contract Research Grant (Industry) U525] Co-Incineration of Oil Palm Biomass And Automative Shredder Residue (ASR) In Swirling Fluidized Bed Incinerator (SFBI) |
31/3/2016 | 30/3/2018 | Project leader | University | 50,000 |
| 5 |
[GPPS U592] Combustion of Oil Palm Biomass in A Swirling Fluidized Bed Combustor |
1/8/2016 | 31/1/2018 | Project leader | University | 23,400 |
| 6 |
[FRGS 1544] Investigation on the Effect of Passive Flow Controlling Devices on Aero-Thermal Permance of Flat Plate Film Cooling |
1/11/2015 | 31/10/2017 | Research member | National | |
| 7 |
[FRGS 1540] Emission Filtration Characteristics by Cold-Mist Spray Process From Kitchen Hood Recirculation System |
1/11/2015 | 31/10/2017 | Research member | National | |
| 8 |
[GPP B067] Modular Air Energy Harvester |
1/6/2016 | 31/5/2017 | Research member | University | |
| 9 |
[GPP B021] Steam Generator via Swirling Fluidized Bed Combustor |
9/2/2014 | 31/1/2015 | Research member | University | |
| 10 |
[GPP B014] Automated Grated Coconut Drying System |
2/9/2013 | 31/10/2014 | Research member | University | |
| 11 |
[GPP B011] Sistem Pelupusan al Quran |
2/9/2013 | 1/9/2014 | Research member | University | |
| 12 |
[GPP B018] Portable Quranic Verses Document Shred Incinerator |
2/9/2013 | 31/8/2014 | Research member | University | |
| 13 |
[GPP B010] Swirling Fluidized Bed Dryer |
2/9/2013 | 31/8/2014 | Project leader | University | 30,000 |
| 14 |
[STG 1096] Invesitigation on Characteristics Behaviour on Developing Atomiser for Fine Spray Using PIV |
1/10/2012 | 1/10/2013 | Research member | University | |
| 15 |
[GPP B002] Swirling Fluidized Bed Combustor |
2/5/2012 | 1/5/2013 | Project leader | University | 28,400 |
| 16 |
[FRGS 0727] Hydrodynamic and Thermal Characteristics of Flow Around Tube Banks with Integral Wake Splitter |
1/3/2011 | 31/8/2012 | Project leader | National | 39,200 |
| 17 |
[FRGS 0731] Analytical and Experimental Study of a Novel Gas Distributor for Swirling Fluidization |
1/3/2010 | 29/2/2012 | Project leader | National | 45,600 |
| 18 |
[FRGS 0370] Combustion Studies of Hydrated and Anhydrous Ethanol-Gasoline Blends in a Variable Volume Chamber |
1/12/2007 | 30/11/2009 | Project leader | National | 80,000 |
| 19 |
[FRGS 0260] Development of a Novel Atmosphere Conditioning System to Improve Working Environment |
31/12/2006 | 31/12/2008 | Project leader | National | 13,000 |
| 20 |
[FRGS 0203] Elastohydrodynamic Film Collapse in a CVT Mechanism |
15/9/2005 | 14/9/2007 | Project leader | National | 35,000 |
| 350,600 |
Innovation
Displaying 4 records.| No | Type of Innovation and Commercialisation | Year | Description |
|---|---|---|---|
| 1 | Patent | 2018 | Swirling Fluidized Bed , Patented Award , Project Leader, No: 164,018 . |
| 2 | Intelectual Property | 2017 | Copyright: Special Industrial Tariff Energy Efficiency Report Template for Ceramic Insulation Industries, In Progress, , No: 123456. |
| 3 | Intelectual Property | 2014 | Low Cost Steam Raising Heat Exchanger, Intelectual Property Product, , No: 14015900101. |
| 4 | Intelectual Property | 2014 | Automated Drying Machine, Intelectual Property Product, , No: 14015860101. |
Supervision
Displaying 6 records.| No | Supervision | Student | Status |
|---|---|---|---|
| 1 | Co- Supervisor |
KHAIRU BIN KAMARUDIN (GD140122)
Numerical and Experimental Study on Conformal Cooling in Plastic Injection Moulding |
In Progress |
| 2 | Supervisor |
Anwer AbdulHussein Gatea (GD170020)
Co-gasification of Oil Palm Biomass in a Downdraft Gasifier |
In Progress |
| No | Supervision | Student | Status |
|---|---|---|---|
| 1 | Supervisor |
MUHAMAD FAZLI BIN OTHAMAN (HD150050)
Combustion of Oil Palm Biomass in a Swirling Fluidized Bed Combustor |
In Progress |
| 2 | Supervisor |
NAZRUL SYAIF BIN HARON (HD150003)
Drying Kinetics of Pepper in a Swirling Fluidized Bed Dryer (SFBD) |
In Progress |
| 3 | Co- Supervisor |
JAMAL HAZRI BIN ZAKARIA (HD130019)
Sponge Media Drying Using a Swirling Fluidized Bed Dryer |
Completed 2016 |
| 4 | Co- Supervisor |
MOHD AL-HAFIZ BIN NAWI (HD110176)
Aerodynamics of a Swirling Fluidized Bed |
Completed 2013 |
No award records found.
Management
No management experience records found.
No working experience records found.
Attended Courses
Displaying 5 records.| No | Course Information | Duration |
|---|---|---|
| 1 |
Energy Efficiency and Solar Thermal Technology
(UNIDO course to become National Expert in Solar Thermal technology. The aim of the course is to develop national experts to reduce GHG emission in Malaysia via Energy Efficiency (EE) and Solar Thermal Application in the industry.)
|
20/11/2017 - 23/11/2017 |
| 2 |
Energy Efficiency Management for Air-Conditioning and Mechanical Ventilation (ACMV)
(This course focuses on Air-Conditioning and Mechanical Ventilation System basics and present industrial practice for energy efficiency, including best practices.)
|
5/4/2017 - 6/4/2017 |
| 3 |
Certified Professional in Measurement and Verification Course
(Certified Professional in Analyzing and Verifying Energy Audit Reports )
|
18/4/2016 - 20/4/2016 |
| 4 |
Certified Energy Manager
(Certified Energy Manager (MAESCO) for Registered Electrical Energy Manager (REEM), Energy Commission, Malaysia)
|
25/1/2015 - 29/1/2015 |
| 5 |
Safety and Health
(Safety and Health BEM Mandatory Course)
|
24/6/2014 - 25/6/2014 |
No records found.